E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Driveline, Engine & DME Tuning (http://forum.e46fanatics.com/forumdisplay.php?f=98)
-   -   Set me up for eu2 tune. Paypal ready $30.00 usd (http://forum.e46fanatics.com/showthread.php?t=948185)

straight_beamin 10-02-2012 12:33 PM

Set me up for eu2 tune. Paypal ready $30.00 usd
 
Whoever can set me up for the eu2 flash through teamviewer or some other remote app will be sent $30.00 USD. I have become way too frustrated and I need this tune asap.

I have the DIS AND SSS software

PM or respond on thread.
Thanks, Jacob

straight_beamin 10-02-2012 05:36 PM

Bump, i know its a pita but anyone?

Wickedly 10-03-2012 05:17 PM

We both on the same page dude :/

HakenTT 10-03-2012 09:26 PM

first post your stock extracted file. EU2 is not compatible with all ms43 ecus. Then if I see that is compatible I will send you the file.

straight_beamin 10-04-2012 04:29 PM

it is compatible i have a 323i, how do i extract the file, read pm

smooth1 10-04-2012 05:03 PM

You have an MS42. Find the Galletto software.

straight_beamin 10-04-2012 08:15 PM

will report back when downloaded

HakenTT 10-05-2012 09:08 PM

Quote:

Originally Posted by 2000e46bmw323i (Post 14788435)
it is compatible i have a 323i, how do i extract the file, read pm

how do you flash it then?

you can't just be flashing your ecu, you can damage it. I got to see your stock software.

straight_beamin 10-05-2012 10:38 PM

I understand, i downloaded the gellatto software but when i go to read the ecu it says impossible

bikeaddict 10-06-2012 11:28 AM

I got very frustrated trying to set mine up as well. Tried everything and every guide online step by step. Finally fired up an older laptop and did the steps again to install, and worked great. So in my circumstance, it came down to the lap top and I guess it not working with the newer operating system.

HakenTT 10-06-2012 09:55 PM

Quote:

Originally Posted by bikeaddict (Post 14793002)
I got very frustrated trying to set mine up as well. Tried everything and every guide online step by step. Finally fired up an older laptop and did the steps again to install, and worked great. So in my circumstance, it came down to the lap top and I guess it not working with the newer operating system.

cracked galletto software is for windows XP only.

straight_beamin 10-09-2012 08:43 AM

ahhh, thanks for help. so if i get win xp and set it up and read stock tune and send it to you and it is compatible it is as simple as you sending me the eu2 tune and me uploading it? thanks jake

darksideracer69 10-10-2012 06:30 AM

are you still at this?

straight_beamin 10-11-2012 03:04 PM

Quote:

Originally Posted by darksideracer69 (Post 14802033)
are you still at this?

ya man lol, i got windows 7 netbook so it is extremely annoying i think i need someone to do some remote access **** from their computer

straight_beamin 10-11-2012 03:55 PM

cant i just buy a dme from europe with 12 14 1 430 440 installed on it and put it in my car?

darksideracer69 10-11-2012 04:57 PM

Quote:

Originally Posted by 2000e46bmw323i (Post 14807174)
cant i just buy a dme from europe with 12 14 1 430 440 installed on it and put it in my car?

Seriously? Can you just pick up a laptop off of cl load xp and do it. It's not that hard.

Sent from my SGH-T959 using Bimmer App

straight_beamin 10-11-2012 05:22 PM

Ya i was thinking about that just wipe all the **** and do ot fresh. Thanks man thats what im doin

darksideracer69 10-11-2012 07:35 PM

Make sure you do it right and put the correct drivers for your hard drive on the xp installation disc, or it'll never work. Or get a copy with sata drivers already on a disc from a certain place. ;)

Sent from my SGH-T959 using Bimmer App

straight_beamin 10-15-2012 04:56 PM

As soon as get xp on the netbook i will retry

phubar 10-16-2012 09:37 PM

Hey man, Ive been struggling in the last couple of days trying to absorb as much info as possible on how to flash eu2 in the 323, just a couple of pointers:

1- You are gonna need winkfp 5.1.6 but all the inpa installs available come with 5.1.0 which wont work at all.
What u need to do is find the 5.1.6 setup package for winkfp and install that first then the rest of the inpa suite. If u do it the other way around and install the regular inpa suite then winkfp 5.1.6, it will SCREW up ur inpa install. I dont know if the mods allow links here for that kind of software so u are gonna have to find them, its not hard just make sure u use the right keywords.

2- I was only able to find one good working install of inpa 5.0.2 by some russian site, its the only one that worked right off the bat without changing anything.

3- You don't need the 20 pin adapter, u can mod the cap (not the connector but the actual cap that u screw onto the 20 pin connector) on the 20 pin connector under the hood by soldering pin 20 to 17 and severing the trace to pin 15, look at the inside of the cap and you'll know what i'm talking about. Again, I don't know if linking to other forums here is allowed or not so google "My DIS/INPA/SSS/CARSOFT/NAVCODER Interface" LOTS of good info in that thread, you just gotta know what to look for.

I went from a very iffy software setup (crashes and errors in every program, leading to a bricked dme) to a rock solid suite, have flashed my car 3 times already, the first time I was in panic mode and to "unbrick" my dme I just did a regular update newer US tune. This morning I flashed a 328 tune with the low compression setting(sluggish) and I just got back from a quick spin after flashing 7528744 "EU2 Exhaust Emission" and "Without Catalytic Converter" off of a 523, I'm gonna try the 528 tune during the weekend see how that goes.

This are just cliff notes, I gotta get to bed, I'm exhausted from kneeling all day in the avionics bay of an ah64d :woot:

Just let me know if u have any questions I'll be glad to help.


All times are GMT -5. The time now is 05:16 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use