E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   The Tire Rack's Tire & Wheel Forum (http://forum.e46fanatics.com/forumdisplay.php?f=6)
-   -   Will these 19" wheels fit my sedan okay? (http://forum.e46fanatics.com/showthread.php?t=948322)

zooswanko 10-02-2012 11:22 PM

Will these 19" wheels fit my sedan okay?
 
I'm looking into purchasing a set of wheels with tires on them. Will they fit onto my 2000 328i sedan without rubbing? If not, what would I have to do to make them work? My car is at stock level. here's the ad for the wheels: http://newyork.craigslist.org/lgi/pts/3307441406.html
Thanks a lot

Sent from my Transformer TF101 using Bimmer App

rcsummers 10-02-2012 11:24 PM

im not good with non-m's but it should work just fine.

Bimmer4Lyfe 10-02-2012 11:29 PM

Jeez thats gonna require a fender roll. And maybe a different tire size on rear,
But it can work for sure, with a little dial in....

Fronts are fine

zooswanko 10-02-2012 11:47 PM

If i get the fenders rolled do you think the tires would be okay?

Sent from my Transformer TF101 using Bimmer App

Bimmer4Lyfe 10-02-2012 11:59 PM

At stock height you might get away with it, but those wheels & tires at stock height is probably not a great look.

I think you will rub for sure with those tires and that offset.
A more narrow tire and maybe camber work will be needed.
If lowered

zooswanko 10-03-2012 11:58 AM

I know with a stock body, 19" wouldn't look great but I am getting mtech bumpers and side skirts which should make it look for proportionate. Anybody have experience puting bigger wheels on a sedan?

Sent from my GT-N7000 using Bimmer App

Bimmer4Lyfe 10-03-2012 12:40 PM

1 Attachment(s)
i had the exact same setup

except my rear offset was 45mm with the same tire size and was lowered on HR sport suspension

i put 5mm spacers (effective offset 40mm) after i rolled the fenders, it still rubbed from time to time,



so, can you imagine 33mm offset?

like i said, you may get away with it on stock height, but big rims and narrow tires with a large wheel gap to fender will not look good, especially with the tire/rim out past the fender, so a narrower tire (stretched) and camber work will be necessary if you want to lower it.

bluesona1234 10-03-2012 10:35 PM

I tried to put 19 in. on mine, but it wasted more gas and rubbed. Not worth compromising the ride quality. They look nice but not a fit for 3 Series.

zooswanko 10-04-2012 04:03 PM

Thanks for the input everybody

Sent from my GT-N7000 using Bimmer App


All times are GMT -5. The time now is 11:25 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use