E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Sponsor Press Releases & New Product Announcements (http://forum.e46fanatics.com/forumdisplay.php?f=92)
-   -   :: ECS Tuning :: ECS Tuning BMW Stainless Steel Rotor Set Screws|New Fitments!!!! (http://forum.e46fanatics.com/showthread.php?t=948627)

ECSTuning 10-04-2012 10:18 AM

:: ECS Tuning :: ECS Tuning BMW Stainless Steel Rotor Set Screws|New Fitments!!!!
 
http://www.ecstuning.com/forum/bmw/ecs800header.jpg

http://youtu.be/k-9HlZmhrsE?hd=1

If your car is driven near ocean sprays or exposed to winter road salt, check out ECS stainless steel rotor hold down screws. Regular steel screws can't stand up to salt. They rust fast and seize in place. Go ahead, try to get them out! The hex head goes round with the first twist of the wrench, and you end up center drilling the bolts to remove them. Argggh. Plan ahead. Install stainless screws on this brake job, and you won't have to drill them out on the next one. Keep them on hand. Type, quantity, and combination of set screws will vary based on model.

http://www.ecstuning.com/marketing/B...Set_Screws.jpg

Click HERE to Select your vehicle > Braking > Rotors > Front/Rear > Hardware






All times are GMT -5. The time now is 11:51 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use