E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   General E46 Forum (http://forum.e46fanatics.com/forumdisplay.php?f=4)
-   -   DIY: Easi[er] Way to Remove Plasti-Dip! (http://forum.e46fanatics.com/showthread.php?t=948961)

aahmed2016 10-06-2012 12:21 AM

DIY: Easi[er] Way to Remove Plasti-Dip!
 
Hey everyone, have any of you ever Plasti-Dipped? Its a great product, but sometimes you mess up and need it redone. I'm going to help you guys learn a quick tip, especially for the newer people to the *Plasti-Dip, world!

Items Needed:
Goo Gone [I used the one I had at home, so free for me, But the 8 .oz is about $3.50 USD at *Ho Depot.
Some Micro Fiber cloths [Have at home. I believe you can get this at *Ho Depot as well.
and a bit of time!

Procedure:
Start out by letting the microfiber cloth sit in a bit of Goo-Gone
Then wipe the area you want to remove the Plasti-Dip from.
NOTE: This won't dissolve the Dip, it will simply make the dip tighten, and a bit easier to remove.
Do this a few times, [I did 5 passes over 3 coats.]
Now start peeling away The dip from a corner, and VOILA! Much easier to remove.


Thanks for reading, and please feel free to share your opinions!


All times are GMT -5. The time now is 11:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use