E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Lighting & Mobile Electronics (I.C.E.) (http://forum.e46fanatics.com/forumdisplay.php?f=37)
-   -   FS: OEM Bi-Xenon Headlights - Complete (http://forum.e46fanatics.com/showthread.php?t=950708)

jack.chris328 10-16-2012 02:01 PM

FS: OEM Bi-Xenon Headlights - Complete
 
The original set I had posted up here have been sold. But I have another set that is available. They are currently set up for a facelift sedan. No missing or repaired tabs on them. There is one small section of the upper inner mounting tab on the passenger side light that is missing. Will not affect fitment(see pictures below). The shrouds have some marks on them from a previously having angle eyes. These have brand new lenses on them. All electronics are included. Selling this set for $670.00 shipped. If you need some set up for a coupe or an M3 like shown in the last picture let me know.

http://i831.photobucket.com/albums/z...th_file-63.jpg http://i831.photobucket.com/albums/z...th_file-62.jpg http://i831.photobucket.com/albums/z...th_file-61.jpg http://i831.photobucket.com/albums/z...th_file-60.jpg http://i831.photobucket.com/albums/z...th_file-59.jpg http://i831.photobucket.com/albums/z...th_file-58.jpg http://i831.photobucket.com/albums/z...th_file-57.jpg http://i831.photobucket.com/albums/z...th_file-56.jpg http://i831.photobucket.com/albums/z...th_file-55.jpg http://i831.photobucket.com/albums/z...th_file-54.jpg http://i831.photobucket.com/albums/z...th_file-53.jpg http://i831.photobucket.com/albums/z...th_file-52.jpg http://i831.photobucket.com/albums/z...th_file-51.jpg http://i831.photobucket.com/albums/z...th_file-64.jpg http://i831.photobucket.com/albums/z...th_file-65.jpg http://i831.photobucket.com/albums/z...th_file-68.jpg http://i831.photobucket.com/albums/z...th_file-67.jpg http://i831.photobucket.com/albums/z...th_file-31.jpg

jack.chris328 10-23-2012 01:04 PM

:bump:

the xecutionr 10-26-2012 12:29 AM

Are these direct plug an play? No dash lights, no codes, auto leveling will work?

Sent from my EVO using Bimmer App

jack.chris328 10-26-2012 05:49 PM

Quote:

Originally Posted by the xecutionr (Post 14848039)
Are these direct plug an play? No dash lights, no codes, auto leveling will work?

Sent from my EVO using Bimmer App

If you already had Bi-xenons from the factory. Then yes. If you are upgrading from halogens. Then no. There are no OEM lights that would just be straight plug and play. You will either have to get your LCM flashed to let in know that it now has xenon's or you will have to install inline cancelers to eliminate the dash light. I have cancelers available also. Then the self leveling there is no lights that are just plug and play for that. These have the capability for that option. But there are two sensors that need be put on the lower control arms front and rear. Then need to be wired into the LCM and the lights. Then the self leveling would function. Plus the car may need to be flashed for that option to start working.

Can I set you up with some plug and play xenons? Yes. But self leveling would be additional work. I do have the sensors and mounting brackets available also, if you really wanted to go that far.

the xecutionr 10-26-2012 06:19 PM

Quote:

Originally Posted by jack.chris328 (Post 14849828)
If you already had Bi-xenons from the factory. Then yes. If you are upgrading from halogens. Then no. There are no OEM lights that would just be straight plug and play. You will either have to get your LCM flashed to let in know that it now has xenon's or you will have to install inline cancelers to eliminate the dash light. I have cancelers available also. Then the self leveling there is no lights that are just plug and play for that. These have the capability for that option. But there are two sensors that need be put on the lower control arms front and rear. Then need to be wired into the LCM and the lights. Then the self leveling would function. Plus the car may need to be flashed for that option to start working.

Can I set you up with some plug and play xenons? Yes. But self leveling would be additional work. I do have the sensors and mounting brackets available also, if you really wanted to go that far.

What if i also changed my lcm.. would the auto on on the new lcm work automatically and cancel out all of the lights? Sorry for all the questions just looking for info before i try to make the switch

Sent from my GT-P3113 using Bimmer App

jack.chris328 10-26-2012 06:32 PM

Quote:

Originally Posted by the xecutionr (Post 14849892)
What if i also changed my lcm.. would the auto on on the new lcm work automatically and cancel out all of the lights? Sorry for all the questions just looking for info before i try to make the switch

Sent from my GT-P3113 using Bimmer App

If you changed your LCM that would negate the need to get it flashed and there would be no lights on the dash. I would assume the auto-on feature would be set already and would function. Not 100% positive on that though. But a couple things about changing the LCM. There is a tamper light on the LCM. It is my understanding that it is linked to the cluster so if one is changed without the other the light will come on, on the LCM. That is just hear/read say. Haven't had the chance to do that swap yet. Then also if you get a bi-xenon LCM the high beams will not work as you would expect. It will only work as the flash to pass feature. There would need to be another set of wires added to actuate the bi-xenon solenoid. That would have to run from the LCM to the lights. As halogens don't have that wire installed. There is other ways to get the bi-xenon function to work. PM me if you want to go further into how to set it up.

the xecutionr 10-26-2012 07:18 PM

Quote:

Originally Posted by jack.chris328 (Post 14849930)
If you changed your LCM that would negate the need to get it flashed and there would be no lights on the dash. I would assume the auto-on feature would be set already and would function. Not 100% positive on that though. But a couple things about changing the LCM. There is a tamper light on the LCM. It is my understanding that it is linked to the cluster so if one is changed without the other the light will come on, on the LCM. That is just hear/read say. Haven't had the chance to do that swap yet. Then also if you get a bi-xenon LCM the high beams will not work as you would expect. It will only work as the flash to pass feature. There would need to be another set of wires added to actuate the bi-xenon solenoid. That would have to run from the LCM to the lights. As halogens don't have that wire installed. There is other ways to get the bi-xenon function to work. PM me if you want to go further into how to set it up.

This is starting to sound like its gonna be a pain in the balls

Sent from my EVO using Bimmer App

jack.chris328 10-26-2012 07:23 PM

Quote:

Originally Posted by the xecutionr (Post 14850023)
This is starting to sound like its gonna be a pain in the balls

Sent from my EVO using Bimmer App

lol. Its not that bad. It depends on how deep you want to go. Really in about and hour or two(depending on skill level) you can have working xenon lights installed in your car. They will function just the same as the light you have now except much brighter. lol. With no dash lights.

the xecutionr 10-26-2012 07:57 PM

Quote:

Originally Posted by jack.chris328 (Post 14850031)
lol. Its not that bad. It depends on how deep you want to go. Really in about and hour or two(depending on skill level) you can have working xenon lights installed in your car. They will function just the same as the light you have now except much brighter. lol. With no dash lights.

I have zenons now in my halogens which imo are way brighter than projectors but i like the updated look of the projectors and i just want them to work like oem

Sent from my EVO using Bimmer App

jack.chris328 10-26-2012 08:03 PM

Quote:

Originally Posted by the xecutionr (Post 14850088)
I have zenons now in my halogens which imo are way brighter than projectors but i like the updated look of the projectors and i just want them to work like oem

Sent from my EVO using Bimmer App

O.k. Well, there is some ideas. I am sure everyone else would appreciate you putting projectors in.

jack.chris328 11-03-2012 02:56 PM

:bump:

jack.chris328 11-10-2012 06:20 PM

:bump:

Kingsbury 11-12-2012 01:37 PM

Do you have part numbers? I am looking to repair/replace both head lights on an 2002 330i with the facelift.

jack.chris328 11-12-2012 01:49 PM

These ones shown here will not fit. But I have a set that will fit a facelift sedan. I can PM you some pictures.

Kingsbury 11-12-2012 01:56 PM

Sure, I primarily need the lens and housing (Left and Right). Let Me know what you have. Part # and pictures would be great. Thanks.

jack.chris328 11-21-2012 02:14 PM

Bump

labrador3color 11-22-2012 08:21 AM

Will these work on a 2004 325i with xenon. Original headlights in good order with new ZKW lenses and lamp but light is poor as original ZKW reflectors are burned. If you deal in these I can certainly return the existing units.

jack.chris328 11-23-2012 11:53 AM

Quote:

Originally Posted by labrador3color (Post 14919300)
Will these work on a 2004 325i with xenon. Original headlights in good order with new ZKW lenses and lamp but light is poor as original ZKW reflectors are burned. If you deal in these I can certainly return the existing units.

These won't work in the current state they are in. But I will PM you with an option.

briangl92 11-26-2012 08:00 PM

Would you consider $400? I don't need the outer lens or the interior trim.

I'm willing to pay for the PayPal fees and shipping on top of that. PM me please

afstud 11-26-2012 09:02 PM

those will work on a sedan, you just have to swap the interior trim piece and lenses


All times are GMT -5. The time now is 08:56 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use