E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Driveline, Engine & DME Tuning (http://forum.e46fanatics.com/forumdisplay.php?f=98)
-   -   Best stroker combination s54 (http://forum.e46fanatics.com/showthread.php?t=954559)

Jenersbimmer 11-06-2012 08:17 PM

Best stroker combination s54
 
Im very interested in doing this.
I saw VAC has a kit. But I was wondering if anyone has done one but bought everything seperatly

Im going for a NA application.

I will do the biuld my self. Im a bmw tech, and run a shop here in PR

stosh1 11-06-2012 10:12 PM

There are cheaper places to source stroker parts from...

Jenersbimmer 11-06-2012 10:20 PM

Like who??

stosh1 11-07-2012 06:47 AM

Recently, I've seen both JAWS Motorsports and another vendor, offering high quality stroker kits in the $4k price range. I'll see if I can find the info. for you & post back up....

stosh1 11-07-2012 11:11 AM

Found another company below offering a stroker kit for under $4k, never spoke w/them though...there's still another vendor out there...just can't remember who???

http://search.yahoo.com/r/_ylt=A0oG7...g.com/bmw1.htm

EDIT: Of course you can always try contacting the manufacturers yourself...JE and CP for pistons//Pauter and Arrow for rods//Arrow for the crankshaft. Then you would also need to source all of the little parts like bearings, rod bolts, gaskets, etc.

Jenersbimmer 11-07-2012 04:14 PM

I emailed arrow and they only sell to vac motorsports!

Jenersbimmer 11-07-2012 07:10 PM

Just saw in another site a 3.7l kit!

0-60motorsports 11-28-2012 02:11 AM

Quote:

Originally Posted by stosh1 (Post 14879527)
Found another company below offering a stroker kit for under $4k, never spoke w/them though...there's still another vendor out there...just can't remember who???

http://search.yahoo.com/r/_ylt=A0oG7...g.com/bmw1.htm

EDIT: Of course you can always try contacting the manufacturers yourself...JE and CP for pistons//Pauter and Arrow for rods//Arrow for the crankshaft. Then you would also need to source all of the little parts like bearings, rod bolts, gaskets, etc.

Im gona email these guys and find out whats up with this kit ;)


All times are GMT -5. The time now is 12:46 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use