E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Exterior (http://forum.e46fanatics.com/forumdisplay.php?f=31)
-   -   E46 Coupe SF bay area: Inspire USA CSL trunk (http://forum.e46fanatics.com/showthread.php?t=955081)

dustyice 11-09-2012 12:32 PM

SF bay area: Inspire USA CSL trunk
 
Im looking to move my never installed single sided carbon fiber trunk from a local shop called Inspire USA. The trunk has been sitting in my room for two weeks and with school I have realized that I do not have the time to paint and install it. The trunk is single sided carbon fiber. I took pictures of all the flaws I could find with the weave. I have not yet tested the fitment but there are no pre-drilled holes so fitment can be custom tailored. Shipping is up to buyer, would prefer local. Feel free to PM me if you have any questions or concerns.
Located in SF bay area.

$450 OBO

http://i226.photobucket.com/albums/d...e/IMG_2602.jpg
http://i226.photobucket.com/albums/d...e/IMG_2597.jpg

Flaws with the carbon fiber I found:
http://i226.photobucket.com/albums/d...e/IMG_2600.jpg
http://i226.photobucket.com/albums/d...e/IMG_2599.jpg
http://i226.photobucket.com/albums/d...e/IMG_2598.jpg

dustyice 11-10-2012 10:18 PM

Price DROP!

dustyice 11-13-2012 01:54 PM

Sale Pending.

hizhinezz 11-13-2012 03:24 PM

:)

hizhinezz 01-04-2013 08:41 AM

This is up for resale as I decided no to try to trim to fit sedan, willing to take a loss to sell it sooner: $350 price tag non negotiable, best deal you'll find in new cf csl trunk even with a few cosmetic flaws (shown above)

Thanks...

hizhinezz 01-05-2013 07:10 PM

Bump

erice46 01-06-2013 09:21 PM

Hey what kinda trimming is needed to fit a sedan

Sent from my SAMSUNG-SGH-I747 using Bimmer App

hizhinezz 01-07-2013 02:14 PM

A bit, would need to take about a half inch off either side top lid back and not even sure about rear panel. I was going I do it but had visions of messing up and screwing up a nice piece of cf that will fit a coupe perfectly...

calebjimz 01-07-2013 06:51 PM

pmd

911 4S 01-10-2013 07:21 AM

Pmed you.

Sent from my SPH-L710 using Bimmer App

erice46 01-13-2013 01:46 PM

Hmm I might be down with the trimming for my sedan

Sent from my SAMSUNG-SGH-I747 using Bimmer App

hizhinezz 01-20-2013 12:22 PM

Bump, sory for anyone who inquired but didn't hear back but as I've now added a different cf csl trunk to my car I'm motivated to sell this ASAP.

Get yourself a new cf csl trunk for $300 plus shipping. This is a good deal folks, arguably 100 under market value for quality part...

eson 01-20-2013 02:04 PM

PM'd. I'm local too.

hizhinezz 01-20-2013 07:16 PM

If its not clear for some reason (misunderstandings via PM) the trunk is $300 picked up or $300 plus shipping if you want me to send it.

Additionally, I don't have a coupe so I cannot provide specific fitment pics, sorry. If you're out of town and you want to have someone come and take a look on their car that's fine too.

I am willing to meet anyone in the Bay Area to deliver the trunk if they are committing to buy it (allowing that they may see something in person and change their minds, of course) but I'm not able to drive it around for people to look at, too busy, plus traffic and gas expenses.

I don't think any of this is too unorthodox. Thanks.

hizhinezz 01-21-2013 08:44 PM

300 for quality cf csl trunk lid, best price anywhere. Imperfect but if you plan to paint it is completely ready to go.

elau8 01-22-2013 04:36 AM

still available? located in sf

hizhinezz 01-22-2013 06:23 AM

Absolutely available, I can even bring it to you in SF if you want. PM me and we can figure out details...

hizhinezz 01-23-2013 02:04 PM

300 for quality cf csl trunk lid, best price anywhere

LongLasting 01-23-2013 09:35 PM

pmed

LSBE46M3 01-24-2013 03:37 AM

Work out in Dublin would love to see this. How is the fitment and tail light alignment?


All times are GMT -5. The time now is 10:00 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use