E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Forced Induction Forum Sponsored by Active Autowerke (http://forum.e46fanatics.com/forumdisplay.php?f=41)
-   -   Custom Hoses/Fittings (http://forum.e46fanatics.com/showthread.php?t=955228)

love2drive330CI 11-10-2012 10:29 AM

Custom Hoses/Fittings
 
Hey Guys,

I am stopping in here since I figure you all have definitely encountered the need for custom hoses.

Understanding the logistics of PSI/fluid type/temperature range etc required; what fittings have you found that will fit over some of the BMW quick release(plastic) nipples/nozzles?

(example: the bottom hose of the oil separator)

I stopped in Aeroquip yesterday to get educated on hose/fittings.

Thanks for your help.

PEI330Ci 11-10-2012 11:30 AM

Quote:

Originally Posted by love2drive330CI (Post 14888226)
Hey Guys,

I am stopping in here since I figure you all have definitely encountered the need for custom hoses.

Understanding the logistics of PSI/fluid type/temperature range etc required; what fittings have you found that will fit over some of the BMW quick release(plastic) nipples/nozzles?

(example: the bottom hose of the oil separator)

I stopped in Aeroquip yesterday to get educated on hose/fittings.

Thanks for your help.

I haven't....and I would say I'm fairly aware of what's out there.

You will have to convert both the male and female end to be able to build custom hoses.

love2drive330CI 11-10-2012 10:09 PM

Thanks PEI330Ci. I looked up the manufacturer of the hose which is Norma but I didn't see a place to purchase just the fittings.


All times are GMT -5. The time now is 09:39 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use