E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Lighting Forum (http://forum.e46fanatics.com/forumdisplay.php?f=88)
-   -   DIY: Morimoto Mini H1 Retofit Installation (http://forum.e46fanatics.com/showthread.php?t=957971)

Solidjake 11-26-2012 06:04 PM

DIY: Morimoto Mini H1 Retofit Installation
 
http://www.youtube.com/watch?v=2BFQu1dDU1o


Still working on how to wire it to a separate switch. They also point down a bit but I'm not sure to how to raise them.

trippmann 11-26-2012 07:32 PM

good video, reduces a few concerns that i had.

rguti153 11-26-2012 08:56 PM

Very nice r these on stock oem headlights or p46

Sent from my DROID RAZR using Bimmer App

maxi 11-26-2012 11:27 PM

Good DIY, I was looking for this.

soneracar 11-26-2012 11:57 PM

Damn you, where was this video 3 weeks ago!

COBYATCH 11-27-2012 01:40 AM

wow this is so tempting to do a quad xenon setup. great tutorial! didn't know how easy it was.

how do the new xenons wire into the headlight? do they have their own ballasts/ignitors or does it use the stock bi-xenon's?

Solidjake 11-27-2012 02:23 AM

This was done on OEM AL headlights. They have their own ballast, but I'm not done with the wiring as I said. I need to install a wire harness and find a trigger wire so I can run them separately with a switch inside of the cabin, that will allow me to run both lows with fogs at once.

salikx13 06-15-2014 01:34 AM

Can i install this on my coupe.
 
I'm a noob on installing things. i've been searching this thread for finding installation tips for my coupe. Didn't find much because these were for sedans. i would appreciate if you guys could shed some light on this. I'm looking to change my stock ugly headlights, to 6000k projectors with halos.


All times are GMT -5. The time now is 02:53 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use