E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Driveline, Engine & DME Tuning (http://forum.e46fanatics.com/forumdisplay.php?f=98)
-   -   HELP! Valves Stuck! (http://forum.e46fanatics.com/showthread.php?t=958240)

dlandon 11-28-2012 11:11 AM

HELP! Valves Stuck!
 
delete

jared_wiesner 11-28-2012 05:22 PM

Do the valves not close as you rotate the engine? They must or they would be bent. Given that the firing order goes from 2 to 4, it makes sense that they would both have their valves open to some extent at the same point in the cycle.

jared_wiesner 11-28-2012 05:37 PM

1 Attachment(s)
See the two sets of cam lobes both pointing roughly up. Those correspond with cylinder 2 and 4.
(I apologize for the blurry picture, I had to zoom way in on a pic from my cam install DIY)

dlandon 11-28-2012 05:54 PM

I thought that might be the case, but wasn't sure. I'll put everything back together and get a compression / leak down test done to make sure it's all sound.

Thanks!

BimmerBrakes 11-28-2012 07:03 PM

they look normal...

SoloII///M 11-28-2012 07:54 PM

This thread has much win.


All times are GMT -5. The time now is 01:56 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use