E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Engine & Performance (http://forum.e46fanatics.com/forumdisplay.php?f=36)
-   -   E46 M3 FS: used VF Engineering Stage 2 Supercharger Kit. E46 M3 (http://forum.e46fanatics.com/showthread.php?t=962518)

silver46 12-26-2012 03:31 PM

FS: used VF Engineering Stage 2 Supercharger Kit. E46 M3
 
FS: used VF Engineering Stage 2 Supercharger Kit. E46 M3
VF570 KIT

Supercharger was upgraded via Vortec. suports 775hp. only few miles since upgrade.
Included 3 pulley size. The current installed pulley is 2.62 which produced 12psi at utah elevation. was using methanal injection and upgraded fuel system sold separately.
Includes Greddy Blow off valve set to vent to atmosphere

Kit puts down over 500whp on a dynapack with methonal and higher boost.

You will need to purchase 1 check valve of which is a few dollars
mounting brackets required for water reservoir
2 fittings for the water lines and finally you will need to send out your ECU to VF for programming

VF570 Supercharger System
Supercharger system setup for 8.5-9.0 PSI, V3-SQ trim supercharger with air/water cooled cartridge inside cast intake manifold. OEM spring tensioner upgrade, Stage 2/3 Bosch fuel injectors, Hitachi MAF conversion, with custom Software flash. Requires sport Cats downstream from header. Cold weather requires boost gauge monitoring and AFR gauge monitoring.

stage 2 rated specs via 2.7 pulley and without methanol.
PSI: 8.5-9.0 (Stock: n/a)
Horsepower: 570, 600 w/ race gas (Stock: 333)
Torque: 380, 400 w/ race gas (Stock: 262)

Components When Upgrading From VF480 System to VF570 System
- Custom tuned software flash
- Replacement 8.5-9.0 psi supercharger pulley
- Replacement OEM serpentine belt
- Replacement fuel pressure regulator
- Replacement serpentine belt tensioner
- Stage2/3 OEM High flow spray pattern matched fuel injectors
- MAF upgrade conversion
- Larger K&N induction filter

asking $7k

images:

http://www.ksl.com/index.php?nid=389...sid=23408713#1

email richard_gibby@comcast.net

silver46 12-30-2012 01:26 AM

http://www.ksl.com/index.php?nid=389...sid=23408713#1

http://www.ksl.com/index.php?nid=389...sid=23408713#2

silver46 12-30-2012 01:30 AM

2 Attachment(s)
Added images

Edgar3498 12-30-2012 03:39 AM

What pulleys do you have

Sent from my SGH-T999 using Bimmer App

silver46 12-30-2012 04:36 AM

3 pulleys. The one for low boost for the 420kit. The 2.7 inch for the upgraded 570 kit and 2.62inch which does 11-12psi at Utah elevation.

Edgar3498 12-30-2012 05:41 AM

Would you sell the 2.7 or the 2.61 pulleys by them self. How much boist is the 2.7 8-9 psi

Sent from my SGH-T999 using Bimmer App

silver46 12-30-2012 01:26 PM

The 2.7 was hitting 10 psi. The supercharger was upgraded recently. I really don't want to part the kit tho who ever buys it might sell the other pulleys they don't use.

Edgar3498 12-30-2012 04:06 PM

Would you sell the 2.7. With one do you have on there

Sent from my SGH-T999 using Bimmer App

M369 12-31-2012 02:56 AM

With 2.61 pulley how Many hp Max?

Edgar3498 12-31-2012 05:59 PM

Did you have slippage

Sent from my SGH-T999 using Bimmer App

M369 01-01-2013 03:28 AM

In new the kit cost 7645$

http://m3forum.net/m3forum/showthread.php?t=426958

silver46 01-01-2013 04:01 AM

That 7k price was for black Friday only. With the 2.6 it was hitting 500whp+. I was running meth injection and an upgraded fuel pump. Both are for sale too.

silver46 01-01-2013 04:02 AM

No slippage. Was running a smaller tighter belt.

M369 01-01-2013 04:42 AM

Do you have vidéo And dyno of your car?

Edgar3498 01-01-2013 10:46 AM

Are u willing to sell the 2.7 pulley im very interested in it

Sent from my SGH-T999 using Bimmer App

Edgar3498 01-01-2013 11:11 AM

Sent from my SGH-T999 using Bimmer App

silver46 01-03-2013 07:40 PM

Bump! Dont want to separate the pulleys.

Edgar3498 01-03-2013 10:30 PM

Ok thanks anyways

Sent from my SGH-T999 using Bimmer App

silver46 01-14-2013 05:26 PM

Bump!

silver46 01-15-2013 05:11 PM

Bump!


All times are GMT -5. The time now is 04:51 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use