E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   DIY: Do It Yourself (http://forum.e46fanatics.com/forumdisplay.php?f=27)
-   -   Wiring Harness - Can Anyone ID this wire? (http://forum.e46fanatics.com/showthread.php?t=962673)

jcallanan 12-27-2012 12:08 PM

Wiring Harness - Can Anyone ID this wire?
 
1 Attachment(s)
Did the CCV system / oil separator and in putting everything back together, I seem to have lost my way with one of the harness connectors. See the pic - it's the bottom wire of the three lower ones coming out of the harness. I can't figure out where it plugs into. :facepalm: Anyone know?

It's a 2000 328Ci.

Thanks in advance!

trentcdrums 12-27-2012 10:40 PM

Disa? Mas? Icv?

jcallanan 12-28-2012 11:36 AM

Found it, I think, but still problems
 
I believe I foun d where it connects but after putting it all back together, it idles really rough and I'm getting 7 codes, including misfire on cyl 1 and throttle position sensor. Could it just be that I attached the connectors incorrectly? Again, this was after replacing CCV.

trentcdrums 12-28-2012 04:18 PM

You can easily get those codes from having a sticking icv. Pull that out and try cleaning. Took me 30 minutes. There's a DIY by solidjake

Solidjake 12-29-2012 10:42 AM

In my vid I stated to take some blue tape and match the wire to the connectors.


All times are GMT -5. The time now is 02:05 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use