E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Engine & Performance (http://forum.e46fanatics.com/forumdisplay.php?f=36)
-   -   *sold*M5 E34 stage 2 flywheel 8.5# UUC (http://forum.e46fanatics.com/showthread.php?t=963232)

krautuner 12-31-2012 12:14 PM

*sold*M5 E34 stage 2 flywheel 8.5# UUC
 
Used part less than 3K was checked by UUC and sent back to me with new bolts.
Can handle up to 450hp & tipping the scales at only 8.5lbs this piece will improve the clamping force of your vehicle while keeping BMW reliability.

Designed to use the clutch disk, pressure plate and throw-out bearing from a 3.6 liter E34 M5.

Asking $300
http://i439.photobucket.com/albums/q...psfa12c626.jpg
http://i439.photobucket.com/albums/q...psd99a763e.jpg
http://i439.photobucket.com/albums/q...ps786ad2d3.jpg

BDUB328I 12-31-2012 03:41 PM

i read your thread and understand what this is ment to fit. but dont alot of people fit these on to e46 m3's? what is needed to make it work other than what you have?

krautuner 12-31-2012 08:05 PM

You'll need a E34 M5 spec clutch and throwout bearing and it should work in your M3, I'd research Turner, or Bimmerworld's websites to make sure.

krautuner 01-01-2013 10:30 AM

fifteen dollars to ship in the States, all PMs replied

krautuner 01-02-2013 08:49 AM

bump

krautuner 01-03-2013 04:38 PM

bump

krautuner 01-05-2013 03:45 PM

all PM's replied

krautuner 01-08-2013 12:18 PM

Bump, PM's replied

bparka12 01-08-2013 06:56 PM

just a couple quick questions... what is the uuc sku# on the flywheel? is it the B1? what year model of car and transmission (5 or 6 speed) did this come off of?

krautuner 01-08-2013 09:20 PM

it was on a 2001 325i 5spd. and it's a B1

krautuner 01-08-2013 11:14 PM

it has been sold


All times are GMT -5. The time now is 08:43 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use