E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Lighting Forum (http://forum.e46fanatics.com/forumdisplay.php?f=88)
-   -   Help me on installing p46 with fxr option (http://forum.e46fanatics.com/showthread.php?t=963860)

alpine86 01-04-2013 08:24 AM

Help me on installing p46 with fxr option
 
Hey all

I just got a set of p46 with fxr (bi-xenon option) and I am quite confused with the wiring.

#2 : HID

#3 : Angel eyes

#5 : High beam

now what's #1 and #4 ?

#4 seems like bi-xenon cords but where should I insert them?

and #1 ??

http://www.image-share.com/upload/1974/144.jpg

trentcdrums 01-11-2013 04:32 PM

I believe, #4 you tap into the high beams, so the wire harness. #1 Could be a day time running light adapter?.. SO you could ignore. Have you hooked them up?

soneracar 01-13-2013 01:25 AM

K, to start you want to
1 plugs into the current headlight plug,
2 goes into the ballast along with the other end of 1,
3 is for the angel eyes. what wiring did you get with it, I might be able to tell you how to wire it up. If you didn't get a wiring kit with them then you can make your own for cheap or just ebay one for $20. (remember that brown is ground!!!!!)
4 same angel eyes just for the right side ring.
5 brights, just plug them in.


All times are GMT -5. The time now is 06:17 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use