E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Driveline, Engine & DME Tuning (http://forum.e46fanatics.com/forumdisplay.php?f=98)
-   -   Sr20det conversion (http://forum.e46fanatics.com/showthread.php?t=964175)

Lamby 318 01-06-2013 12:19 PM

Sr20det conversion
Hi has any one put a 'sr20det' in an E46?
Just wondering if you fabricated a new drive shaft to match up with the BMW diff or if you had every thing Nissan underneath

jerseyzillest 01-06-2013 12:32 PM

I've been curious about this too.

sedanpowersc 01-14-2013 09:28 AM

People have swapped 2jz's, anything is possible with enough money, but for what it would cost you would probably be better off doing an S54 swap

Sent from my DROID RAZR using Bimmer App

Lamby 318 01-15-2013 04:53 AM

Thanks mate i have been looking at the N54 B30 I'm looking for something that will run about 300bhp but will also have a potential of about 550bhp
My aim is a show/ drift car
Can anyone recommend a good limited slip diff? And what ratio I should get?

sedanpowersc 01-15-2013 12:25 PM

Throw on an M3 rear subframe and diff, higher ratio and limited slip and costs less than most aftermarket LSD's

Sent from my DROID RAZR using Bimmer App

All times are GMT -5. The time now is 09:42 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
(c) 1999 - 2016 performanceIX Inc - privacy policy - terms of use