E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   NY / NJ / CT (http://forum.e46fanatics.com/forumdisplay.php?f=54)
-   -   FS rear seat delete coupe/m3 $150 (http://forum.e46fanatics.com/showthread.php?t=964397)

secono330ci 01-07-2013 06:37 PM

FS rear seat delete coupe/m3 $150
 
I have 10 sets of rear seat deletes that will fit any e46 coupe or m3 coupe. They are wrapped in black felt and will match the oem black carpet perfectly. This mod saves a good 50lbs and looks really nice.

Here's what it looks like on my car. The only difference is the top part of mine is wrapped in red suede.

http://farm9.staticflickr.com/8073/8...15b3aaf0_c.jpg

http://farm9.staticflickr.com/8222/8...d72f0e41_c.jpg

http://farm9.staticflickr.com/8072/8...f10b044a_c.jpg


Asking $150

rcsummers 01-08-2013 12:11 AM

Bump for a great guy!

serdar255 01-08-2013 03:03 PM

Nice! Bump

tks 01-08-2013 05:07 PM

Does this make the car noisier?

Your car looks really nice, like the flow.

Gheybe 01-08-2013 05:08 PM

Bump. OP puts out.

rcsummers 01-08-2013 05:33 PM

Quote:

Originally Posted by ruskisky (Post 15042600)
Does this make the car noisier?

Your car looks really nice, like the flow.


Yes. because the seats act as insulation. The rear upper portion is made out of a sound deadening material, but doesn't do the same job as the seats would. The bottom, is made from a non sound deadening material, so you will more easily hear things hitting under the car there.


Am I right Stav?

smares21 01-08-2013 05:44 PM

Make one for the vert please? My backseat is useless anyways.

peytonracer4 01-08-2013 05:54 PM

This looks really nice.

secono330ci 01-08-2013 06:54 PM

Here's one I just test fitted. All black :)

http://farm9.staticflickr.com/8507/8...c058b32c_c.jpg

http://farm9.staticflickr.com/8352/8...8fcc62af_c.jpg

http://farm9.staticflickr.com/8238/8...a41a3779_c.jpg

secono330ci 01-08-2013 07:00 PM

Quote:

Originally Posted by serdar255 (Post 15042159)
Nice! Bump

Thanks!
Quote:

Originally Posted by ruskisky (Post 15042600)
Does this make the car noisier?
I would be lying if I said no, but not by much.
Your car looks really nice, like the flow.

Thanks, I like when things flow well :)
Quote:

Originally Posted by Gheybe (Post 15042606)
Bump. OP puts out.

:str8pimpi
Quote:

Originally Posted by rcsummers (Post 15042672)
Yes. because the seats act as insulation. The rear upper portion is made out of a sound deadening material, but doesn't do the same job as the seats would. The bottom, is made from a non sound deadening material, so you will more easily hear things hitting under the car there.


Am I right Stav?

Yup. Couldn't have said it any better myself.
Quote:

Originally Posted by smares21 (Post 15042709)
Make one for the vert please? My backseat is useless anyways.

The top part would most likely fly off with the top down since it's press fitted :rofl:
Quote:

Originally Posted by peytonracer4 (Post 15042747)
This looks really nice.

:thanks:

smares21 01-08-2013 07:02 PM

Should be easy to add screw mounting tabs...

secono330ci 01-08-2013 07:17 PM

Probably, unfortunately I don't have a vert around here to test fit it on.

smares21 01-08-2013 07:20 PM

Just post up a thread, I'm sure someone will volunteer if you make it worth their while...

secono330ci 01-08-2013 07:24 PM

Quote:

Originally Posted by smares21 (Post 15043070)
Just post up a thread, I'm sure someone will volunteer if you make it worth their while...

Ok I'll see what I can do :)

ICONIKE46 01-10-2013 12:38 PM

Bump for a great guy!

I really does look clean and is quality work, seen it plenty of times. Saves lots of weight too :woot:

e46craze 01-11-2013 11:01 PM

:bump: for an awesome guy and great quality work. Takes his time and his work comes out top notch:)

BeMyWhip 01-12-2013 09:52 AM

What do you use... 5/8" plywood?

Wonder if you can make it lighter using 1/2"?

the goal is weight saving right?
Im sure 1/2" will still hold up if you need to throw someone back there
In an emergency.

Also, maybe you make the front edge 45.
It would flow right into the floor carpet really nice and is really easy to do.
Just thinking at loud. Great work!

secono330ci 01-12-2013 10:28 AM

Quote:

Originally Posted by BeMyWhip (Post 15054511)
What do you use... 5/8" plywood?

Wonder if you can make it lighter using 1/2"?

the goal is weight saving right?
Im sure 1/2" will still hold up if you need to throw someone back there
In an emergency.

Also, maybe you make the front edge 45.
It would flow right into the floor carpet really nice and is really easy to do.
Just thinking at loud. Great work!

I use 5/16's plywood on the bottom. It's the thinnest it could get without wobbling around. It's also perforated plywood which sheds some weight even more. I personally wouldn't put anyone back there period..it's not safe lol.

As for the floor carpet, I'm not sure I understand the 45 degree..it does line up with the edge perfectly though. :)

BeMyWhip 01-12-2013 11:23 AM

[QUOTE=secono330ci;15054578]I use 5/16's plywood on the bottom. It's the thinnest it could get without wobbling around. It's also perforated plywood which sheds some weight even more. I personally wouldn't put anyone back there period..it's not safe lol.

As for the floor carpet, I'm not sure I understand the 45 degree..it does line up with the edge perfectly though. :)[/QUOTE

Ok, well 5/16" is practically a 1/4", wow, cool.
By 45 I meant the front lip where it meets the floor carpet.
You know cut it across use a 45 slant to your circular saw if you use a guide, or a table saw set at 45. Just would make a better transition off the floor to the front edge of the board. Looks great, not knocking your work, just think it would look a bit more polished.

smares21 01-12-2013 08:22 PM

Convertible!!!!!!!!!!!!!!!!!


All times are GMT -5. The time now is 01:26 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use