E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Australia (http://forum.e46fanatics.com/forumdisplay.php?f=48)
-   -   Sourcing stock coupe front bumper in Sydney. (http://forum.e46fanatics.com/showthread.php?t=965963)

sychen 01-16-2013 03:22 PM

Sourcing stock coupe front bumper in Sydney.
 
Hi fellas.

Need to replace a coupe front bumper... Not sure where to find locally this as I normally order parts from OS.

Want to keep the oem look and not go for a m3 or csl style "upgrade".

Thanks

Sent from my Galaxy Nexus using Bimmer App

Pawley 01-16-2013 04:52 PM

Hi Sychen,

I am in the midst of replacing my OEM pre-facelift front bumper with a M-tech II.

The OEM bar has some paint damage (carbon schwartz 303 in colour) and will need to be resprayed, but is otherwise structurally sound.

I am in Adelaide, but could arrange freight.

M3 CS 01-17-2013 07:07 PM

What's wrong with the current one? If it's not too bad and just need a spray, would be a cheaper alternative than sourcing another one and spraying.


Otherwise, have used the following without issues:

Sydney Wide European Autos - www.swea.com.au

Parramatta Prestige - www.parramattaprestige.com.au

Rob32R 01-18-2013 03:31 AM

Try Parramatta Presige or ASV Euro spares who both are european car wreckers that usually specialise in BMW's who would most likely have the part you are after.

http://www.eurocarparts.com.au/

http://www.parramattaprestige.com.au/

Goondaddy 01-18-2013 05:53 AM

Should have posted this last week. Just threw out my old one!

Also recommend SWEA.


All times are GMT -5. The time now is 11:26 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use