E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   E46 Convertible (http://forum.e46fanatics.com/forumdisplay.php?f=106)
-   -   Alarm (http://forum.e46fanatics.com/showthread.php?t=966811)

linom3 01-21-2013 09:07 AM

Alarm
 
Guys Im ready to get the oem alarm, now where is the best place to order online? :thanks:

SMUUUUUV 01-24-2013 02:35 PM

Read through this thread. Pretty good alternative..... http://forum.e46fanatics.com/showthread.php?t=761104

linom3 01-25-2013 07:32 PM

Quote:

Originally Posted by SMUUUUUV (Post 15092444)
Read through this thread. Pretty good alternative..... http://forum.e46fanatics.com/showthread.php?t=761104

I was looking at that. Great idea. Go steelers:thumbup:

SMUUUUUV 01-28-2013 04:26 PM

Quote:

Originally Posted by linom3 (Post 15096889)
Go steelers:thumbup:


:thumbsup:

sakumaxp 01-29-2013 06:27 PM

the OEM alarm for our cars are discontinued sadly

HiHoBrian 01-29-2013 06:31 PM

Quote:

Originally Posted by sakumaxp (Post 15108713)
the OEM alarm for our cars are discontinued sadly

Thankfully the 3 series was produced by the millions and any one of the alarm components are compatible between any e46. (Some exeptions apply to verts)
You can find all the components on ebay,or most any e46 classifieds section,or any car parts recycler/junk yard.

sent from my ATARI sc1224

linom3 01-29-2013 06:32 PM

Quote:

Originally Posted by sakumaxp (Post 15108713)
the OEM alarm for our cars are discontinued sadly

I order one on line and they told me is in back order from Germany and will take 4-6 week for $445. I cancel my order and went to ebay and found everything I need to do it for $206. I have all the parts numbers if anyone needs them.

Poncho@home 01-29-2013 06:43 PM

I'd love to have all the part numbers

linom3 01-29-2013 06:56 PM

Ok here ya go!

1-tilt sensor----------------------------------65756923215
2-m6x10mm hex bolt w/flat washer(2)----07119915041
3-motion sensor-----------------------------65756074633
4-plastic nut---------------------------------16131175747
5-siren---------------------------------------65758383153
6-m6 hex w/captive flat washer-----------07119915039
7-siren bracket------------------------------65758377290
8-m6 prestal cage clip----------------------32411095443
9-adapter cable-----------------------------61126944874
10-template---------------------------------01290026907
11-additional required parts -- rear motion sensor housing
black------------------------------------------51167024827
gray-------------------------------------------51167024828
beige------------------------------------------51167024829

Poncho@home 01-29-2013 06:57 PM

thanks.

Redflea 01-30-2013 02:47 PM

Where is the motion sensor on the vert? It's in the roof in my 530i, but I know it won't be there on my wife's vert. :)

sakumaxp 01-30-2013 04:02 PM

The vert doesn't use the motion sensor

Redflea 01-31-2013 11:24 PM

Quote:

Originally Posted by sakumaxp (Post 15112578)
The vert doesn't use the motion sensor

Actually found out you can have a motion sensor in the vert...ECS sells a euro alarm set for $399 that includes motion sensors that go off if someone reaching into the car if the top is down, or going through the top.

Redflea 02-01-2013 01:16 AM

Quote:

Originally Posted by linom3 (Post 15108891)
Ok here ya go!

1-tilt sensor----------------------------------65756923215
2-m6x10mm hex bolt w/flat washer(2)----07119915041
3-motion sensor-----------------------------65756074633
4-plastic nut---------------------------------16131175747
5-siren---------------------------------------65758383153
6-m6 hex w/captive flat washer-----------07119915039
7-siren bracket------------------------------65758377290
8-m6 prestal cage clip----------------------32411095443
9-adapter cable-----------------------------61126944874
10-template---------------------------------01290026907
11-additional required parts -- rear motion sensor housing
black------------------------------------------51167024827
gray-------------------------------------------51167024828
beige------------------------------------------51167024829

What install instructions did you follow? How did it go?

linom3 02-01-2013 06:29 AM

Quote:

Originally Posted by Redflea (Post 15118207)
What install instructions did you follow? How did it go?

Im still waiting on parts.

SMUUUUUV 02-03-2013 09:44 AM

You can easily add a motion, shock and Dual Zone sensor to your car. Dual Zone is good for verts to detect anyone reaching in while your top is down... You can use the previous link that I showed you and run all of these together for a fraction of the price. Works fine for me.

Motion Sensor http://www.ebay.com/itm/Digital-Tilt...vxp=mtr&_uhb=1

Shock Sensor http://www.ebay.com/itm/DEI-505T-Eff...vxp=mtr&_uhb=1

Dual Zone http://www.ebay.com/itm/DEI-508D-DUA...8dba627&_uhb=1

linom3 03-01-2013 06:24 PM

Got all my parts installed and alarm coded. Works great!


All times are GMT -5. The time now is 09:50 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use