E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   General E46 Forum (http://forum.e46fanatics.com/forumdisplay.php?f=4)
-   -   how do i pull out my DSC button from the interior to check if its plugged in? (http://forum.e46fanatics.com/showthread.php?t=967108)

NickBMW 01-22-2013 06:35 PM

how do i pull out my DSC button from the interior to check if its plugged in?
 
help???

TT330i 01-22-2013 06:55 PM

You have to remove the sunglasses holder/climate control depending on what options you have

Sent from my SCH-I535 using Bimmer App

Alex323Ci 01-22-2013 07:07 PM

I think I told you this already. But maybe you need exact details with photos??
If that's the case look at the directions to install a Dynavin navigation head unit. Some of the steps to remove the lower console are what's needed for access to the back of the panel where the DSC fits.

NickBMW 01-22-2013 07:11 PM

thanks!!

Zell 01-22-2013 07:23 PM

- Take shift boot out of the way
- Remove surrounding shifter trim: two screws, slightly latched under sunglass holder
- Pull lower sunglass holder out of the way (may be a screw in there, can't remember. If there is, you'll see it for sure)
- Look under the button strip. You'll see if it is plugged in or not

This is just from memory, but it's all really straight-forward. It'll be hard to screw up. Once you remove the shift boot, it's all immediately obvious on how it is put together


All times are GMT -5. The time now is 12:38 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use