Parting out the **COMPLETE** engine bay.
I have a 2003 E46 M3 to part out.
Phone- Seven Five Seven Two 70 One Nine Six 8
Location- NORFOLK VA
I have paypal and I can ship!
**** MANY PARTS ARE NOT LISTED BUT ARE FOR SALE**
Also selling my e46 m3 Ebay Headers they fit well and have not been used!
Just want my $200 back for them. I fitted them to the oem head and they fit. You will need longer manifold studs but will come with gaskets.
I will answer PHONE-txt and Emails the quickest. Answering my phone periodically through out the day. If you want to take a look at any parts or inquire about any parts you can come to my WORK any time Monday thru Friday 8-5. IF you give me a call we can arange any meeting after hours.
I HAVE A LOT OF PARTS FOR e46 Forsale! Call And ASK!
NO PRICE IS A FINAL PRICE NEGOTIATE AND MAKE OFFERS. Cash talks and the bs walks. Please dont waste my time or anyone elses. Lets GET THESE PARTS GONE!!!!!
If there is any engine part, drive train part (minus the rear end) you may need give me a call, txt or email. I have many parts that need to go!!
I can EMAIL or TXT pictures of any part you are interested in! Car Just hit 100,000 miles and all of this stuff has to go!
E46 M3 S54 Transmission- $1850 Will Come with clutch, Perfect for someone looking to swap!
100% perfect! No pop outs, grinds etc! Transmission shifts smooth!!
E46 M3 S54 HEAD- $750 (as is) I am a local mechanic and more than welcome to suggest a machine shop to you!
Oem springs valves reatainters etc
Needs to be resurfaced and check by a machine shop and repaired ( piston came apart) head is 100% usable after a little machining.. Nothing major
E46 M3 S54 Block- $850
(Motor saw detonation and cracked a piston) The block is 100% usable and great for a build or a rebuild and use as oem)
This block made 306whp with just a muffler, I have the dyno sheets to prove it!
E46 M3 MISC PARTS- All of these parts are OEM and 100% usable!!
Coolant passage for block *aluminum* _ $50
Thermostat housing- $60
Coolant hoses- $30
OEM Intake Manifold- $200
OEM Individual THROTTLE Bodies- $300 (perfect for someone looking for an extra kick- porting them and polishing them can net 10-15whp)
OEM- Egr AIR pump- $45
OEM- Alternator- $150
OEM- Starter- $100
OEM- A/C compressor with lines 100% perfect $350
OEM- A/C condensor $75
OEM- Air intake with KNN filter (Gained 13WHP) - $75
OEM- Air intake Cowel for grill - $20
OEM- Radiator Fan/ Clutch - $75
3 OEM coils 100% working- $60
3 Aftermarket coils UNDER WARRANTY still- $90 Or, ill take $120 For all 6 COILS!
Individual Throttle body actuator MOTOR-$200
I still have any and all engine sensors and harness etc anything you may need off an e46 and is located in the engine bay I will 100% consider parting with!
Give me a call it wont hurt to ask if i have a part!
OEM E46 M3 ******VANOS***** UNIT This unit is complete with all vanos components and electronics
$700 100% working and ready to go! All hardware and gears ready to swap in!!!
Do you have the fan shroud that goes on the both sides of the engine ?
3 and 4 in this pic below. If yes, PM me your price shipped to 91344.
take it up
added pics and more info!!!
Bump. Please make offers
Water pump in working order? How much shipped to 32826?
passenger side axle, driver door locking actuator, shipped to buffalo?
Hi,how much for complete intake?
do you still have the throttle bodies and actuator?
Im located in Great Bridge, Chesapeake VA
How much for the power steering pump?
I need the plastic shroud that goes around the fan and attached it to the radiator.
Looking for a radiator to fit my 2000 5 speed 328ci. Let me know if you have one available. Thanks.
This guy lies by omission. Bought his Vanos and he had taken it apart for some reason. Be careful when doing business with him.
Make sure you discuss the whole story and don't feed these people with lies.
The vanos was removed and taken out in pieces.
BMW makes a special tool to reassemble the vanos.
This guy, bought the vanos "used" off my "running" car I told him up front vanos worked great on my car and that he shouldnt have any "working" issues.
There fore if he had a vanos tool or taken it to a mechanic that had the tool "I know RACEWERKS" locally has the tool. And is a BMW cert shop. Could have done this no problem.
The car was taken to Atlantic auto works and he was told the vanos need to be sent in for rebuilt. . . "Because they do not have the specific tool to fix the vanos.
NOT MY FAULT AND NOT MY PROBLEM.
YOU bought a used unit and what we discussed YESTERDAY the stipulations when you buy something used and try and have a shop INSTALL used parts.
Leave it at that and move on. I'm sorry you don't have the proper tools. Not my problem. I sold you exactly what I sold you. A USED working vanos. Don't post on here negatively because you've had a bad shop experience. You took it upon your self to spend $1200+ dollars to doc vanos. Or atleast that is what you told me it is costing you.... Why anyone would spend 1200 over buying another used part and selling the one I sold you is beyond anyone's right mind.
Still have a bunch of items.
Email me firstname.lastname@example.org
Oem section 1
Power steering resivoir
Power steering lines with cooler
You lie so much, you dont even know what the truth is. Your car was not running. You sold me a vanos unit that you completely took apart piece by piece. For what reason, I still dont know. You are a claimed mechanic but you, in this case did not know how to take the vanos unit off. You then tell me that the vanos unit is ready to go, but it might need a new seal. You also told me the seal woudl be a relatively cheap item. I take the unit to Atlantic and they ask me why did you take the unit apart. I let them know that the guy who sold it to me took it apart. Liar here, neglects to tell me that there is a special alignment tool needed to put this thing back together and the seals are like 300.00. Now people, who do you know or what shop do you know that will put a vanos together for free, regardless if they have the special alignment tool or not. When I spoke to this guy after I found out what I needed, he tells me that BMW has the tool. Did not even mention Racewerks. SO that tells me he knew the item was not plug and play. Just look at his response: "NOT MY FAULT AND NOT MY PROBLEM". That should be enought for any reasonable person to stay away. I have chalked it up as a lesson learned. Im just giving fellow boarders fair warning. Deal with him at your own risk.
Aux fan and SMG pump?
|All times are GMT -5. The time now is 11:38 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.