E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Suspension and Braking (http://forum.e46fanatics.com/forumdisplay.php?f=35)
-   -   FS: Strut tower reinforcement plates (http://forum.e46fanatics.com/showthread.php?t=979313)

lejeunebimmer 04-01-2013 12:48 AM

FS: Strut tower reinforcement plates
 
I have a pair of brand new never mounted Genuine BMW E46 strut tower reinforcement plates. I just got them last week and was going to put them on, but didn't realize that they would interfere with my Vorshlag Camber plates, and between the camber plates and my strut tower brace, I don't really need them anyway.

I'll let them go for 15 plus shipping. TMS, and everywhere else sells them for 20 plus shipping.

Small disclaimer, one has some scuffs, from me accidentally sliding it on my garage floor, purely cosmetic. Like I said never mounted.

RKiepper 04-01-2013 01:23 AM

Got a pic?

lejeunebimmer 04-01-2013 01:54 AM

I'll take one tomorrow, I'm at my apartment, and they're in my shop.

JTripper 04-01-2013 05:48 AM

Interested as well

LV DON 04-01-2013 08:50 PM

Interested as well

lejeunebimmer 04-02-2013 06:56 PM

http://i564.photobucket.com/albums/s...0712C1EBDC.jpg

http://i564.photobucket.com/albums/s...070A37E5C2.jpg
http://i564.photobucket.com/albums/s...06F981C2AC.jpg

http://i564.photobucket.com/albums/s...06EC752FAC.jpg

http://i564.photobucket.com/albums/s...065A667766.jpg

RKiepper 04-02-2013 11:39 PM

PM sent

lejeunebimmer 04-03-2013 02:32 AM

Sold!!!

itscoo2pyopants 04-05-2013 01:07 AM

i never did figure out how to install these. i bought a set and they were both the same (as you have pictured). drivers side fit fine, but the passenger side i wasnt able to match up the holes. i thought i might have accidently got the same side. anyone install these before? any problems getting them to fit?

e46mook 04-08-2013 08:06 AM

I don't think there is a R/L difference. I installed mine no problem.

adamdifilippo 04-10-2013 12:17 PM

Quote:

Originally Posted by itscoo2pyopants (Post 15314208)
i never did figure out how to install these. i bought a set and they were both the same (as you have pictured). drivers side fit fine, but the passenger side i wasnt able to match up the holes. i thought i might have accidently got the same side. anyone install these before? any problems getting them to fit?

Had the same problem. I drilled a hole in my passenger side one so that the nipple thing could fit. Took about a minute. Longest part of the process was making sure that the hole was in the right spot (mirroring the hole that is already there on the other side of the oval by eyeing it). Use the same side bit as the hole is though and you have some room to "mess up" as the holes are wider than they need to be.

adamdifilippo 04-10-2013 12:22 PM

Quote:

Originally Posted by itscoo2pyopants (Post 15314208)
i never did figure out how to install these. i bought a set and they were both the same (as you have pictured). drivers side fit fine, but the passenger side i wasnt able to match up the holes. i thought i might have accidently got the same side. anyone install these before? any problems getting them to fit?

Had the same problem. I drilled a hole in my passenger side one so that the nipple thing could fit. Took about a minute. Longest part of the process was making sure that the hole was in the right spot (mirroring the hole that is already there on the other side of the oval by eyeing it). Use the same side bit as the hole is though and you have some room to "mess up" as the holes are wider than they need to be.

lioe46 04-10-2013 06:28 PM

I dont think these are design for m3, need modification to make it fit

Iggy27 04-10-2013 07:36 PM

Still up?

JTripper 04-10-2013 07:47 PM

For christ sake he sold the phuking plates already! Take this over to the tech/DIY forum, thanks


All times are GMT -5. The time now is 03:27 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use