E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   The Tire Rack's Tire & Wheel Forum (http://forum.e46fanatics.com/forumdisplay.php?f=6)
-   -   Varrstoen wheels (http://forum.e46fanatics.com/showthread.php?t=983962)

quiksilver4drM3 04-25-2013 10:29 AM

Varrstoen wheels
 
Morning guys I've did some research and have seen that a couple of members have ran some wide wheels on their non-m sedans and coupes but they all had more of a higher offset. I'm looking to run 18x9.5 and 18x10.5 et 30 all around. I understand ill have to stretch the tires but my concern is whether rolling the fenders will be suffice or if ill have to cut out the inner lip. As of now the car sits on 3sdm .05s which are 18x8.5 and 18x10 et 37 and I have no problem even with the car on the lowest height on the PSS coils. The front currently is running -1.5 camber and the rear is -.75, so what do you guys think?

Thanks


Sent from BimmerApp mobile app

VMRWheels 04-25-2013 01:02 PM

That sizing is pretty aggressive, and it's definitely going to take work to fit.

The fronts stick out 20mm further than what you're running now, and the rears are 13mm further.

quiksilver4drM3 04-25-2013 01:08 PM

Varrstoen wheels
 
Definitely a difficult fit. I did have 18x9.5 et35 in the front and didn't have rubbing either, had some space. I think the back is going to be the most difficult to fit. Thanks for the input VMR :thumbsup:


Sent from BimmerApp mobile app

VMRWheels 04-25-2013 01:32 PM

The rear will definitely be a challenge! What tire size were you thinking about running?

quiksilver4drM3 04-25-2013 01:41 PM

Varrstoen wheels
 
Probably 255 -35
And a little more camber, just for the summer show season. What would you recommend


Sent from BimmerApp mobile app

VMRWheels 04-25-2013 02:12 PM

Well it's all going to depend on how you set your car up. Just depends on how much stretch you want on that setup.

quiksilver4drM3 04-25-2013 02:24 PM

Varrstoen wheels
 
Yea for sure, definitely not going to do crazy stretch. But I might have to just go with a square set up. There is a guy on here press22 running 17x9 et12 so how would that compare to a 10 lol


Sent from BimmerApp mobile app

BimmerFool1 05-01-2013 05:32 PM

wheres the best place to fine the best deal on a set of Varrstoen wheels online? im looking for some LM-R reps, dont know if i want to run 19'' or 18'' still, i think 19s look good but may still be too big....one concern is tire pricing is night and day... :/ any advice?


All times are GMT -5. The time now is 01:42 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use