E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   ///M3 Forum (http://forum.e46fanatics.com/forumdisplay.php?f=65)
-   -   Not Another Wheel Fitment Question... (http://forum.e46fanatics.com/showthread.php?t=986471)

mike4-vr6 05-10-2013 08:26 AM

Not Another Wheel Fitment Question...
 
Im looking at a set of Forgestar F14's and I have done math on math on math to figure out what my idea of a perfect set-up would be without fender work. Its come down to this...

(R) 19x10.5 et25 (Super Deep Concave)

(F) 19x9.5 et42 (Deep Concave)

I am pretty positive that the rears should work and clear fine. However, I am worried about inner clearance for the fronts. Can somebody tell me if they will clear?

If not, my back up size is (F) 19x9 et40

Thanks! :)

HunterM3 05-10-2013 10:44 PM

Running that fitment up front with a spacer. Just only think to worry about is the fitment with the coilover if using a progressive spring setup.

mike4-vr6 05-15-2013 08:43 AM

Quote:

Originally Posted by HunterM3 (Post 15414588)
Running that fitment up front with a spacer. Just only think to worry about is the fitment with the coilover if using a progressive spring setup.

Yea that is what I am afraid of. What size spacer are you running. Are you running progressive coils? I will be installing ST coilovers with the wheels.

HunterM3 05-16-2013 10:09 AM

Quote:

Originally Posted by mike4-vr6 (Post 15425144)
Yea that is what I am afraid of. What size spacer are you running. Are you running progressive coils? I will be installing ST coilovers with the wheels.

10mm spacer in the rear. And yes progressive coils, 3mm up front to clear my coils but that has to do with my weird offset on my 9.5" in the front VB3's

mike4-vr6 05-16-2013 10:29 AM

Quote:

Originally Posted by HunterM3 (Post 15428642)
10mm spacer in the rear. And yes progressive coils, 3mm up front to clear my coils but that has to do with my weird offset on my 9.5" in the front VB3's

Great info. Thanks! I think im gonna go with 9.5 et42 and 10.5 et 25 (F14 super deep concave all around).

mike4-vr6 05-16-2013 11:20 AM

Quote:

Originally Posted by HunterM3 (Post 15428642)
10mm spacer in the rear. And yes progressive coils, 3mm up front to clear my coils but that has to do with my weird offset on my 9.5" in the front VB3's

Hey actually one more question... Do your front wheels poke or are they flush? Also, are you running any neg camber?


All times are GMT -5. The time now is 12:08 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use