E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Parting Out (http://forum.e46fanatics.com/forumdisplay.php?f=76)
-   -   Parting out 2001 325Xi - Toronto (http://forum.e46fanatics.com/showthread.php?t=992507)

Streetthispgt 06-16-2013 08:11 PM

Parting out 2001 325Xi - Toronto
 
Parting out a 2001 manual 325Xi with 340k km (210k miles).

Here's what's gone so far:

Hood/Grilles
Front Bumper/ Fog lights
Radiator/AC Condensor/Expansion Tank
Rear doors
Trunk Lid/Handle
Electric Fan Assembly
Passenger Fender
Xenon headlights
Center console/armrest
Leather Seats
Sport steering wheel/airbag
Mirrors
Secondary air injection
Rear Springs

Everything else still available.

http://i110.photobucket.com/albums/n...m/IMG_0527.jpg

http://i110.photobucket.com/albums/n...m/IMG_0528.jpg

http://i110.photobucket.com/albums/n...m/IMG_0529.jpg

MiniD 06-17-2013 01:47 PM

How much for the entire set of body moldings?

Streetthispgt 06-17-2013 04:12 PM

I do not have an entire set of moldings. The front bumper is gone, the rear left door is gone, and the left back bumper molding is gone.

If you are interested in the rest let me know and I can shoot you a price.

Solo74 06-17-2013 04:30 PM

Re: Parting out 2001 325Xi - Toronto
 
What shape is your sunshade in and how much?

Sent from BimmerApp mobile app

Blind_Shooter 06-17-2013 08:07 PM

I need the passenger side windshield washer nozzle and the rubber hose that connects the passenger side to the driver side nozzles.

also still looking for
Motion sensor and plastic trim on the roof
Rear cubby ash tray
shipped to 34209

E46_Project 06-18-2013 04:42 PM

Nut and bolt from battery terminal and right side window switch?

leblancrene 06-18-2013 05:37 PM

Wiper drive assembly?

Streetthispgt 06-22-2013 11:38 AM

I've PM'ed most of you.

Solo74: Car has no sunroof.

Thanks.

moti9833 06-27-2013 06:48 PM

how much for the motor i have an 02 325i needing a motor

SSB Z4 06-28-2013 11:41 AM

pm'd you about rear brakes

Streetthispgt 06-28-2013 03:17 PM

$500 for the motor. Does not include DISA, ignition coils, or wiring.

SSB Z4: You have a PM

SSB Z4 06-28-2013 09:49 PM

PM replied.

2002GreenBMW 06-30-2013 01:34 AM

Parting out 2001 325Xi - Toronto
 
How is your passenger front axle?


Sent from BimmerApp mobile app

891CARLOS 07-03-2013 10:42 PM

PM sent

kakashi_sensi 07-03-2013 11:33 PM

How much for the manual tranny? is it 5 spd or 6 spd? And how much for the wind shield water carrier? PM me.

Im located in toronto.
Thanks.

epfenninger 07-04-2013 12:12 PM

How much for the secondary/aux fan? and has it been replaced? Thanks
Disregard, sorry

Rhadamanthys 07-04-2013 10:36 PM

hey, Im interested in the frontal slam panel and the covers attached to it. Give me a shout. I'm also located in toronto.

Streetthispgt 07-05-2013 04:35 PM

2002GreenBMW: The axle is in good shape however I think shipping it from Canada to your location would probably cost more than you could pick one up for locally.

I've sent the rest of you guys a PM.

the fly 07-15-2013 11:33 AM

Hey there

How much for the FCAB lollipops (front control arm bushings)? I don't care about the rubber condition.

I'm in Atlanta.

Thanks,

Rick

engineear 07-16-2013 01:48 AM

Seeking the passenger side skirt...still available?


All times are GMT -5. The time now is 01:57 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use