View Single Post
Old 05-25-2009, 03:31 PM   #10
Registered User
Join Date: Oct 2002
Location: mx
Posts: 469
My Ride: 2002 2.2L I6 Sedan

This past saturday I installed the painted mirrors.

Here are is a pic of the M6 bolts (10mm hex head) that are holding the left mirror. The length of these bolts should be 20mm. With these bolts the mirror are by far more secured than with the stock torx screws. In the top bolt a had more space and used one standard washer and one pressure washer, on the lower bolt, since the surface is not level I used two pressure washers.

Here a pic of the stock mirrors foam, I really think this is the best way to go to avoid the filtration of water and the potential for wind noise. In red circles the modified areas.

And finally some finished pics:

Attached Thumbnails
Click image for larger version

Name:	Mirror_1267.JPG
Views:	17997
Size:	74.6 KB
ID:	316456   Click image for larger version

Name:	Mirror_1271.JPG
Views:	17795
Size:	84.3 KB
ID:	316458   Click image for larger version

Name:	Mirror_1273.JPG
Views:	17856
Size:	91.7 KB
ID:	316459   Click image for larger version

Name:	Mirror_1275.JPG
Views:	17796
Size:	90.7 KB
ID:	316460  

Click image for larger version

Name:	Mirror_1269.JPG
Views:	18431
Size:	69.9 KB
ID:	316467  

No, no, there is no climate change, it just getting hotter and hotter....and hotter. Yeah, right!?!!?
adrian320 is offline   Reply With Quote