View Single Post
Old 06-02-2009, 11:07 AM   #3
sna77
OEM ///Member
 
sna77's Avatar
 
Join Date: Jan 2005
Location: MA
Posts: 7,704
My Ride: BMW
I just plugged everything in to make sure it worked (it did!):


I then pulled everything out and decided to mount the KCA-420i to the Sirius bracket. There was plenty of room for both. Used locking nuts, of course...





There is plenty of room with the Sirius module mounted to feed the Alpine's 2 cables out the back of the unit. I zip-tied the excess cable and stuffed it between the BM53 radio and the Sirius bracket:


Here is everything put back together. I put the IV2 on top of the Bluetooth ULF so I could easily get to it for future firmware updates. For firmware updates the car needs to be in position 1 (for ibus communication) with the IV2 plugged in and a serial cable running to your PC.



With the carpet back on, its super clean. There is velcro under the ipod to secure it in place:

Last edited by sna77; 06-02-2009 at 11:39 AM.
sna77 is offline   Reply With Quote