| Sorry to bump an old thread... but can I solder the wire to the location circled on the pic below? or would I have to try to find another ground?
Or, can I solder a tab to this location?
thanks in advance!!
Originally Posted by ssm1991
A lot of guys have PM'd me to ask where to connect the ground wire if you don't have the tab (i.e. some pre-facelift models).
You can wrap 2-3 turns of the ground wire around the spot circled below, then wrap with electrical tape. Note that that point is part of the metal strip that goes to all bulbs.
used to hate german cars... now i have 2!!!!
Last edited by odgamma15; 07-07-2009 at 02:16 PM.
Reason: added comment