Sorry, my previous response was incorrect. What I did was squeezed the clip with my hand as tight hard as I can without breaking. It took a couple of tries by it worked. Good luck!
Originally Posted by djdonis
I have tried to disconnect the evap purge valve on my 2001 330i, but got stuck with the bottom hose, can't remove it. Bentley manual states "(2) release the bottom vent hose by pressing the locking bar and detaching". There is a plastic clip that seems to be holding the bottom hose connector in place, do I have to remove it? Do I simply pull the hose off the valve? I don't really want to break off anything...
Last edited by monkey330i; 07-17-2009 at 08:49 PM.