E46Fanatics - View Single Post - WP Pro BBK Giveaway Final round
View Single Post
Old 08-28-2009, 12:19 PM   #1
Past Site Sponsor
Join Date: Dec 2007
Location: Canada
Posts: 122
My Ride: E39
WP Pro BBK Giveaway Final round

The time has come, once again, I'm extremely sorry for how long this has dragged on, for all participants who are interested, I've drafted up a flat rate sponsorship for you guys, please contact me for details.

There's total of 12 in this final round, it'll be open for exactly 5 days, so please vote wisely and fairly.

The winner will receive the complete kit include front and rear for an E46 M3, the package consists of:

For the front:
5000tons cold forged, t6061 8pot calipers with built in carbon nitride treated heat shield in red.
360mm x 30 x 46 rotors with forged alloy rotor hats
all brackets and stainless steel brake lines
4pcs brake pads

For the rear:
5000tons cold forged, T6061 6pot calipers with built in carbon nitride treated heat shield in red.
360mm x 30 x 46 rotors with built in hand brake drums into the rotor hats
all brackets and stainless steel brake lines
4pcs brake pads

1) Max Chiu


2) Cuong Phan


Cuong's M3 has the Flossman wide body, 19"fr, 20"rear set up, custom lower headlight trim, custom painted hood, Jl audio 500/5 and 500/1 amplifier, Jl audio 10" w3 subwoofer, 2x savv 6" screens in trunk, Tsunami wiring harness, Kenwood kvt 815 multimedia system, suspension is lowered and improved by H&R 16 way adjustable coilovers, Engine has been slightly tuned with a upgraded K&N 63 intake and race flow exhaust, Lighting consists of Umnitza v2 60 led angel eyes and oem led tail lights

3) Edwin (clutchm3)


4) Brian Tannis


UUC Evo3 with ZHP knob
VMR CSL reps
CF diffuser, splitters, angel eyes
CDV delete
TC Kline coilover
Vorschlag Monoball camber plates

5) Brian Wong


6) Ravi Johal

Vorsteiner GTR Single sided CF hood
Vorsteiner CSL front bumper with intake hole delete
Vorsteiner CF Race lip
Vorsteiner CSL Bootlid in single sided CF
Vorsteiner GT3-S Rear diffuser in full CF
EAS Blacked out front grills and side gills
EAS CF roundels
Depo Front smoked corners
Color matched headlight inner trims
Wheelpower halos

Color matched interior trims
ACS CF E-brake handle
M-Sport Aluminum pedals
Defi boost/oil press./oil temp. gauges
Leatherz gauge pod
AEM boost/afr gauge with steering wheel pod
2X Status Rings in CF and Alcantara.

Horsepowerfreaks Stage 2 Turbo Kit
Horsepowerfreaks 4'' CF intake tube
Horsepowerfreaks Custom titanium muffler
Horsepowerfreaks Custom dump tube, venting to atmosphere
Horsepowerfreaks Stage 2 clutch
Horsepowerfreaks Under brace
APR Head studs
Vorshlag solid motor mounts
Vorshlag solid tranny mounts
Vorsteiner CF Engine cover
EAS CF Air snorkel
Rouge Oil filter cap
Custom CF Tub cover
Custom Headlight duct, routed to intake pipe

Wheels and Tires:
BBS LM's with custom painted charcoal centers
BBS Red/Gold lettering center caps
Bridgestone RE-01 Tires, 245/35/19 and 275/30/19

KW Variant 2 Coilovers
Eibach front and rear swaybars
Powerflex RTAB
TMS Endlinks

OEM CSL Rotors
OEM CSL carriers
Axxis Pads
UUC Caliper bushings

7) Dan Fabbri

Dan's car is a real track bruiser

-UUC swaybars
-Autopower roll bar
-Sparco seats with Sabelt 6 point harnesses
-Turner camber plates up front
-Powerflex RTABs
-TR Motorsports rims with Hoosier R6 track tires
-RaceCam onboard video system with Intercomp on board timer
-Turner CF brake cooling ducts
-Braile 11.5# battery
-Removed sound system, and other unnecessary weight for track, saving an extra 100 pounds

8) Azzad G


9) Jun

Jun's car's current mods include:
-CSL Front Bumper
-Hartge Front Lip
-Hartge Front Splitter
-CSL Rear Diffuser
-Matte Black Kidney Grills
-Matte Black Side Gills
-Smoked Signal Corners
-Seibon CSL Bootlid
-Matte Black Vinyl Roof

-Sparco Milano II Alcantara Seats
-Custom Two-Tone Suede Rear Seats

-Work Meister S1 3pc.
-19x9.5 +30 and 19x11 +17
-Matte Gunmetal/Polished Steplip
-Falken 452s 245/35/19s and 275/30/19s
-Rad Wheel Locks

-Magnaflow Full-Catback Exhaust System
-10mm RE Spacers
-RPI Hood Scoops

-Predator Chromium DDEs
-Invisibulb Front Turn Signals
-LED Interior Bulbs
-LED Taillight Outer Ring Mod
-Transparent Yellow Highbeam Bowls

-OEM BMW Roof Rack modified w/ Yakima Fairing

10) Ray S

Ray's current mods include:
-6 speed manual transmission
-Carbon Black exterior paint
-Black leather interior
-HPF Stage 2 Turbo kit w/ methanol injection
-HPF Feramic Clutch
-HPF/AEM Engine Management system
-HPF 750cc injectors
-Precision T67 Turbo
-HPF Turbo Manifold
-HPF Intake Manifold
-AEM Boost & Wideband Gauges
-Dual HKS Super Sequential Blow off Valves
-Tial 44mm V-Band Wastegate
-HPF Under Brace
-HPF Methanol Activation Switch
-SPC Adjustible Lower Camber Arms
-HPF Subframe reinforcement
-Vorsteiner Double Sided carbon fiber VRS Vented Race Hood
-ACS front splitter with carbon fiber struts
-carbon fiber side gills
-carbon fiber kidney grills
-carbon fiber rear diffuser
-euro-spec carbon fiber bootlid
-19" x 8.5" front, 19" x 10.5" rear, Volk Racing CE28N Time Attacks
-245/35/19 front tires, 285/30/19 rear tires
-Vorshlag Stud Kit
-Rays Engineering Lug Nuts
-Custom Clear bra by Pro-tectfilm.com (full hood, front bumper, rocker panels, rear bumper, A*****ars, rear wheel impact, kidney grills, full front fenders, fog lights, mirrors, etc)
-Smoked tail lights & window tint by Pro-tectfilm.com
-Autosolution SSK
-Dice ipod connector
-Tien S-tech with Koni yellows
-Custom Red gauge face, Red interior LED lights, speedometer, tach, radio, a/c, window switch, steering wheel control lights all changed to RED LED's by LEDMOD.COM
-Aurora 60 LED Angel Eyes by EAS
-Carbon fiber interior wrap by Euro-Dyne.com
-Agency Power Exhaust System
-Custom straight pipe section 2 exhaust
-Rouge engineering tranny mounts
-Rouge engineering rear shock mounts
-Depo smoked corners
-LED front & side turn signal bulbs
-HPF Black Anodized out intercooler
-Carbon Fiber Roundels
-Hardwired V1 Radar Detector

11) John Kim

-Lamborgini Satin Balloon White Paint
-Vorsteiner VRS front lip (custom molded)
-Flossman GTR carbon fiber hood
-Vorsteiner CSL carbon fiber bootlid
-CA Automotive DTM diffuser (custom molded)
-GTR rear bumper
-GTR fenders
-matte black kidney grills & fender gills
-cf mirror covers
-cf headlight trim
-Madico Carbon 35% tint
-DEPO smoked corners
-Predator Orion angel eyes
-ProLumen HID 6000k foglight conversion
-6000K D2S bulbs
-LED turn signals
-M-Tech foglights
-SSR GT2-H 19x8.5, 19x0
-Falken 245/35, 275/30
-Laguna Seca Blue BMW individual full interior
-cf M3 steering wheel trim
-cf SMG dome
-cf SMG paddles
-cf center console
-cf seat trim
-cf tool kit tray
-cf fabric seat backs
-automatic brake pedal conversion
-Ultimate pedals
-M5/M6 illuminated shift knob
-illuminated door sills
-LED interior bulbs
-Ground Control coilovers & camber plates
-Rogue Engineering rear shock mounts
-PowerFlex rear trailing arm bushings
-Eibach anti-roll kit
-stainless steel brake lines
-Motgul RPF600 brake fluid
Engine & misc:
-Streamline panel filter
-Magnaflow full exhaust
-RPI intake scoops
-Radenergie cf engine cover
-cf radiator cover
-cf xenon cover
-cf battery terminal cover
-cf cabin filter cover
-cf DME cover

Sam@WPPro is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.