View Single Post
Old 12-26-2009, 09:27 PM   #3
jeechung
Registered User
 
Join Date: Dec 2009
Location: Boston
Posts: 2
My Ride: 2004 325XiT
Changing the brake fluid and flushing/bleeding the lines was thought about, but here's a bit more detail about the history of this behavior that may or may not lend support to the suggestion. When the brakes were done on the car earlier this year, I first had the rear brakes done. They did not change the brake fluids. After a few days, this double-braking problem appeared. Thinking that maybe the front brakes were going, I had the bront brakes done. This time around, I mentioned the double-braking behavior and the shop suggested fluid replacements. So along with front brake replacement, the brake fluid was replaced and bled. All seemed good until few weeks later, the behavior returned. Eventually, I found that the front rotors were "warped" and the shop that did the front brakes turned the rotors. After that, it seemed good until few weeks later, the behavior returned yet again. I don't know what to make of these sequence of events.
jeechung is offline   Reply With Quote