View Single Post
Old 01-04-2010, 12:26 PM   #2
OG Moderator Extraordinaire
B's Avatar
Join Date: Mar 2001
Location: NJ
Posts: 5,620
My Ride: 325iX-M3-525iT-M5
Send a message via AIM to B
a long threaded bolt, some nuts, and some correct sized attachments to match the bearing races may be all you need if you pull the strut housing... that's what I did on my iX (should be similar)

something like this might get you the correct size to push the bearings in and out:

good luck!
B is offline   Reply With Quote