I'm planning on doing this over the weekend and had a question for those who have already done this.
Reading thru all of this, it seems that you would need to use a puller or a dremmel to get the inner race off if it does in fact get stuck behind. I don't have a dremmel nor do I have a puller. I do a lot of DIYs and I've never needed a dremmel, until now. And the puller they have at my autozone is too thick at the jaws to fit.
Worst case scenario, assuming the mallet/hammer/rotor tricks all don't work, I'm thinking of taking two long flathead screwdrivers at 12 and 6 or 3 and 9 o'clock and prying the crud out of the inner race. Just going by the pictures, it appears workable...but am I just being naive or do you think this would work...with some added time of course?
Carbon Black 2004 M3
K&N Filter / K&N Intake / D. Gunmetal Advan RS / KW V2 Coilovers / Powerflex FCABs & RTABs / Rogue Engineering RSMs / DICE iPhone Integration
Matte Black Grilles-Gills / Smoked Corners-Sidemarkers / ZCP Shift Knob / Midland 1001Z CB / SW Interior-Plate LEDs / Eurotray / Hardwired Passport 8500 / Blaupunkt GTA4 Amp / Rockford Fosgate Sub / Alcantra Shift and P-Brake Boots