View Single Post
Old 07-09-2010, 03:01 PM   #2
BimmerBrakes
The Brake Newbie!
 
Join Date: Feb 2010
Location: DFW, Tx
Posts: 1,146
My Ride: 2005 ZHP BMW
Send a message via AIM to BimmerBrakes
For the front brake issues. You got a sticky caliper. You will need to clean the guide bushings and the pins. I would lightly grease the pin before reassemble to help the caliper move to it's original spot. If the bushing are in terrible condition you will have to rebuild the caliper.

For the triangle light problem. That would he the wheel speed sensor. I would check and clean the speed sensor and then go from there.

Keep us posted on what happen

Anthony@BimmerBrakes

Last edited by BimmerBrakes; 07-09-2010 at 03:04 PM.
BimmerBrakes is offline   Reply With Quote