Ugh! I just can't figure it out. I pulled all the wiring and reconnected and still get the same results. At least now the gauge is actually moving between -12 to -18 at idle but doesn't past zero on the throttle. Gauge reads zero when on the throttle and goes back to -12 to -18 when I let off. I moved the sensor to 3 different spots on the vacuum line, one in between the blow off valves, one closer to the fuel rail after the 2 blow off valves, and one right after the hard line coming from the fire wall. Unplugged the sensor and replugged, nothing! I can also just have the shop that's doing my dyno take a look and hopefully make it work...I know I'm making boost, just not sure how much!?!
"Live life to the fullest"