View Single Post
Old 10-01-2010, 02:26 PM   #29
PreppyR6
Registered User
 
Join Date: Mar 2006
Location: Maryland
Posts: 792
My Ride: shines like justice
Quote:
Originally Posted by Darkoz View Post
No worries, did you just cut the reverse light wires or did you take the OEM plug off and connect/solder the camera wires to the ends of the reverse light wires and then slide the wires back into the OEM plug, if so how do you get the wires out of the OEM plug, I can't figure out how to disconnect the wires from the plug..
We just used a couple t-taps to tap into the reverse pos/neg wires. I stripped back the wriring from the camera and attached some connectors to fit the t-taps and then tapped the wires going to the passenger side reverse light (doesnt matter which reverse light you pick). No need to remove plugs or anything.
__________________
---------------------------------------------------
Das Weena!

Last edited by PreppyR6; 10-01-2010 at 02:31 PM.
PreppyR6 is offline   Reply With Quote