View Single Post
Old 10-12-2010, 05:58 PM   #2
2003 325i
Registered User
 
Join Date: Mar 2009
Location: New Hamburg, Ontario, Canada
Posts: 1,636
My Ride: '03 Orient Blue 325i
just took some measurements. fronts will have about 4mm poke once I get close to 0 deg toe (I know this measurement shouldn't affect poke at the centre of the wheel). The rears are offset about 4-6mm inside the wheel well. So I guess 8mm spacers in the back are the right ones for me. Assuming I do these what can I do to make this work? A little neg camber? I'd rather have stock alignment specs but if it's like 0.5 deg neg camber needed I'm fine with that.
2003 325i is offline   Reply With Quote