E46Fanatics - View Single Post - Reverse Camera Install Locations
View Single Post
Old 11-30-2010, 12:47 AM   #74
Registered User
Join Date: Nov 2010
Location: Hickory, NC
Posts: 89
My Ride: BMW X5, BMW M3
Originally Posted by inta View Post
2 questions for you guys:
1- What's the 'connector cable' needed to hook up the green "REVERSE" signal off the back of the Dynavin directly to the fuse box, so that it activates the camera when the car is put in reverse? Going to take it in to a shop to get this part done, but want to have the right cable when I go. Need to know the connector on both ends (Dynavin side and the fuse box side)
2- Can anyone with an E46 SEDAN tell me how to pass the cable from the back seats to the trunk? I passed the cable along the side wall on the passenger side, but when I took off the grey trunk lining yesterday, I couldn't find a single hole where you can pass a cable from the back seat/cabin to the trunk. I know on a COUPE with fold-down seats, it's easy, but can't seem to find a way on my sedan.

U pulled only the panel against the seat then. Pull the side panel off on the side ur running cables thru and you will see factory wires coming thru a black foam gromet. There will be some on either side you chose. you will also need to pull the back seat to do this properly. Its really not as much to pull out as it sounds.
95seriesbmw is offline   Reply With Quote