Anyone who has tried this:
I have a 04xi. base package w/old fashioned manual mirror. popped it out and to my suprise, it has a fully wired 10 pin harness (with only two wires going into the mirror - for clown nose). I plugged in my new anti dazzle mirror w/ugdo and its doing nothing. Not even blinking the light- then again, its bright as hell out, so who knows. 2 questions - 1. are we sure wire for wire its the same harness (before I get out my tester.... and 2. is there a fuse that may have been left out for this or does this need to be retrofitted into the VO/ZCS?