View Single Post
Old 12-15-2010, 06:36 AM   #21
franz
Registered User
 
Join Date: Aug 2006
Location: RDU, NC
Posts: 2,888
My Ride: 03 330i
Quote:
Originally Posted by Recon2005 View Post
Unless someone else chimes in, the way I understood how to tighten the nut on the top of the strut assembly was to use a spark plug socket, thread the allen wrench through the opening and then tighten down the nut while holding the allen wrench in place so the assembly would not rotate...IDK, but that's the process I used.
that is correct and if you use a long socket 7mm you can actually put a torque wrench on this, I believe it's 65Nm.
__________________
franz is offline   Reply With Quote