View Single Post
Old 12-20-2010, 05:01 PM   #28
Registered User
Join Date: Nov 2010
Location: Ireland
Posts: 10
My Ride: 2000 318ci E46
Originally Posted by haurelio View Post
no thats' not correct.. i did use the resistor and diode.. this is pretty much what i did.. and then i just kind of use the shrink plastic and black electrical just keep in mind that this will work only if you have not unplugged/disconnect the internal blue and white wires.. and as far as the light. it should go away by itself ( no always the case).
ah I see now!. the way that i done it is, I removed the blue and white wires from inside the black box and soldered the components directly onto the circuit board were they once were. I then reassembled the black box and plugged it back into the wiring loom, do you get me?.
floorjacker is offline   Reply With Quote