View Single Post
Old 12-23-2010, 06:22 PM   #1099
KamPow3r
Registered User
 
Join Date: Aug 2006
Location: Los Angeles
Posts: 827
My Ride: ....
Quote:
Originally Posted by jeffb325@DynavinSolutions View Post
on the front and rear speaker amp, on this amp it is labeled input sensitivity, turn it down some. You want it set as low as possible while still being able to achieve sufficient volume by turning up the dynavins volume.
Quote:
Originally Posted by Str8down View Post
Easiest way to set it is this... Turn that "input sens" dial down as low as it will go, then turn your stereo up to max volume. Now slowly turn the "input sens" up until the sound just starts to distort. Done
Quote:
Originally Posted by jeffb325@DynavinSolutions View Post
^^^this is how its done but in most cases you should turn up the head unit to about 3/4 as most head units will distort at max volume.
Awesome, thanks guys I appreciate the help!
__________________
"Aerodynamics are for people who cannot build engines..."
- Enzo Ferrari
KamPow3r is offline   Reply With Quote