View Single Post
Old 12-31-2010, 10:38 AM   #53
johnnySV
Registered User
 
Join Date: Dec 2010
Location: NH
Posts: 28
My Ride: AWDsprtwgn
SUGGESTION:

my fabric did not easily separate from the plastic so i used a heat gun (pointed at the plastic side) to break the adhesive and ran some dental floss inbetween the plastic / fabric to shave the two apart.

----

otherwise this DIY is spot-on and i completed successfully
(also did hardwire radar on the green/blue Homelink power wire)

thanks!
johnnySV is offline   Reply With Quote