View Single Post
Old 01-31-2011, 02:01 PM   #75
TitaniumCranium
/// Limitless
 
TitaniumCranium's Avatar
 
Join Date: Apr 2005
Location: Seattle / Sequim
Posts: 3,195
My Ride: 2002 BMW 330Ci
Quote:
Originally Posted by Nervous View Post
Very useful write-up, thank you a lot! Even though I am not going to swap my step by manual in the nearest future, this write up is still useful as DIY for rear main seal or auto trans removal.

I have a question, tho:


What is the point of removing these bolts? Am I correct, these bolts fix torque converter to the flywheel?
Thank you very much! As Cyberkaa mentioned, if you don't remove them you can't seperate the torque converter from the flywheel and drop the transmission. It would be stuck in place by those three bolts.
__________________

/// MODS
/// Auto => 6-Spd Manual Conversion | Apex EC-7 | Koni/Ground Control Coilovers | Vorshlag Camber Plates | Meyle HD LCA | PowerFlex bushings | GruppeM rep CAI | Shark Injector | 6000k HID's and Fogs | BMW European MTechII | BMW Performance Shifter | ACS Mirrors and Rear Spoiler ///
TitaniumCranium is online now   Reply With Quote