View Single Post
Old 02-04-2011, 09:44 AM   #5
Mark M
Registered User
 
Join Date: Sep 2009
Location: Lancaster, PA
Posts: 420
My Ride: e30 M3 / e90 335d
I've never done this job, but will in the next month.

However to the OP, I'd imagine the shaft has splines on it that fit into the receiving end inside the gearbox. Have you tried rotating the shaft slightly so as to line up the splines for mating into the box then putting pressure on it?
__________________
Mark M is offline   Reply With Quote