View Single Post
Old 02-15-2011, 09:14 PM   #5
jetjockey
Registered User
 
Join Date: Dec 2008
Location: look up...way up.
Posts: 37
My Ride: Bus...a big one.
I pulled the vaccuum line from the brake booster. It's a rubber gromet connection that after pumping the brakes a few time to release the vaccuum in the system pulled out easily. I plugged the holes to prevent debris from getting into the booster or the end of the hose. That allowed me to move the hose enough to get the shield out....and now I have access to the intake boot clamps>>>>>YIPPEEEE....next problem is how to disconnect the electrical cable from the throttle body...haven't figured out that connection yet....other are easy.
jetjockey is offline   Reply With Quote