a wobble and long extention worked for me all the time. Just put it strait down behind the disa valve (hard to explain). the connection from the throttle body use your hand and a screw driver. Like the other connection push down on the tab and use a flat head screw driver between the connector and throttle body (position it to where you can Pry the connector out toward desired direction) . DO NOT PRY (will brake more easily).... Twist the screw driver while pulling on the connector. This technique is very affective when dealing with connectors in tight spaces
Last edited by imlostathome; 02-16-2011 at 02:14 AM.