02-20-2011, 03:44 PM
Join Date: Mar 2008
Location: SV, Arizona
My Ride: 325CI
| This is how the wheel, fender, and fender liner look with the wheel on:
I cut the fender liner with a dremel. This I what it looks like now:
I totally removed the metal fender clip and screw. I shaved the screw off with a dremel and then used a self-tapping screw from the bumper cover to the body. The bumper cover will actually be pulled in enough to where you don't need the self-tapping screw, but I did it just to make sure nothing moves. :
This is a close up of the outside. You can see that the screw I used to mount the bumper cover to the body it is not visible.
I hope these pictures help.
'02 Orient Blue 325Ci
Last edited by tuscan1205; 02-20-2011 at 03:46 PM.