View Single Post
Old 02-23-2011, 08:26 AM   #4
99
Registered User
 
Join Date: Jan 2010
Location: Nunya
Posts: 152
My Ride: 2013 Sonata 2.0T SE
Quote:
Originally Posted by mikel325xi View Post
Thanks Xi ter!, anyone else had a good experience with any aftermarket brands???? Thanks, Mike
Well the OEM parts were **** to begin with and fail all the time so I'm not sure that there's an advantage to paying more for them unless you can get a good deal from a site sponsor.

I bought a driver's side rear window regulator from this website and it's been fine for over a year.

http://www.1aauto.com/1A/WindowRegulators/BMW/330i

Good luck on the DIY. It's easy but takes a lot of time. I have 2 pieces of unsolicited advice for you.

1. As you remove screws, use masking tape to tape the screws to the door panel near the place where you'll replace them.

2. Take your time when removing the vapor barrier and use a box knife or razor blade to cut through the adhesive.
99 is offline   Reply With Quote