View Single Post
Old 03-02-2011, 03:07 PM   #3
Kubica
Registered User
 
Join Date: Apr 2008
Location: Boston
Posts: 4,380
My Ride: 2003 325xi
Quote:
Originally Posted by SamDoe1 View Post
Koni shocks/struts and Eibach springs seems to be the best setup for the xi in terms of little bit of lowering and still maintaining the comfort. Bilsteins seem to get reviews of being too harsh for a daily driven car unless you drive on smooth roads. If you don't care about lowering, just get a stock suspension...it'll be the most comfortable.

Tischer doesn't make anything, they are simply a vendor for OEM parts. If you go on ECS tuning (another vendor) has them for $20 a piece, you will need two.

Fronts: http://www.ecstuning.com/BMW-E46-330...w_All/ES61971/

Rears: http://www.ecstuning.com/BMW-E46-330...w_All/ES61947/

Good luck.

Oh just kidding, you have a 325xi... The sensors might be different for the 325 but I'm not sure. Check in on that, you can just change your model on ECS and it'll pull up the right part for you.

I have Bilstein HD's and nobody has called the ride in my car harsh.

You need 2 brake sensors TOTAL: one front and one rear to clear up any confusion.

I've found Pelican the best place to buy OEM (but not OE BMW) parts:

http://www.pelicanparts.com/bmw/cata...pg4.htm#item12
Kubica is offline   Reply With Quote