Thanks.... had to compress cloth in both corners...if you consider the corners that piece is being asked to conform to; there was alot of cloth that had to be "reckoned with". The solution was to accumulate it into the two outside corners. It's compressed but matches on both sides and is flat, so it becomes the pattern in the corners.... Would probably try something different in subsequent wraps (I have 3 C63 AMGs pending based on the same thread I posted on some of the Mercedes boards; 1 committed). One from Indonnesia!!
Last edited by Nachos23 @ carbon-effects.com; 03-06-2011 at 02:01 PM.